TABLE 3

The effect of the difference between assigned (Embedded Image and Embedded Image) and true (α and τ) values of the model parameters

α = 1,000α = 2,500α = 5,000α = 7,500α = 10,000
Standard deviation of estimated position of selected locus (kb)
τ = 0115.576.157.860.560.4
τ = 0.01120.174.263.364.564.8
τ = 0.02120.676.557.359.862.7
τ = 0.05129.988.569.770.572.0
τ = 0.1143.5103.986.682.783.2
τ = 0.15149.2119.8103.3100.4100.6
τ = 0.2156.4132.5119.3115.8115.0
τ = 0.5175.8165.8164.3162.6161.9
Power (%)
τ = 018.974.896.098.699.3
τ = 0.0117.474.096.399.599.9
τ = 0.0215.973.097.099.599.9
τ = 0.0512.164.592.798.499.4
τ = 0.14.941.282.493.498.7
τ = 0.154.228.466.283.689.9
τ = 0.22.118.348.567.674.8
τ = 0.50.41.75.06.78.9
  • The effect is measured by the power of the test (with Embedded Image, Embedded Image, Embedded Image, and Embedded Image), where the window size is 400 kb. The position of the selected locus is at 200 kb, and the positions of the neutral loci are determined by LPS2. The italic numbers denote cases of high power.