- Split View
-
Views
-
Cite
Cite
Pip B Wilson, Jared C Streich, Kevin D Murray, Steve R Eichten, Riyan Cheng, Nicola C Aitken, Kurt Spokas, Norman Warthmann, Sean P Gordon, Contributors Accession, John P Vogel, Justin O Borevitz, Global Diversity of the Brachypodium Species Complex as a Resource for Genome-Wide Association Studies Demonstrated for Agronomic Traits in Response to Climate, Genetics, Volume 211, Issue 1, 1 January 2019, Pages 317–331, https://doi.org/10.1534/genetics.118.301589
- Share Icon Share
Abstract
The development of model systems requires a detailed assessment of standing genetic variation across natural populations. The Brachypodium species complex has been promoted as a plant model for grass genomics with translation to small grain and biomass crops. To capture the genetic diversity within this species complex, thousands of Brachypodium accessions from around the globe were collected and genotyped by sequencing. Overall, 1897 samples were classified into two diploid or allopolyploid species, and then further grouped into distinct inbred genotypes. A core set of diverse B. distachyon diploid lines was selected for whole genome sequencing and high resolution phenotyping. Genome-wide association studies across simulated seasonal environments was used to identify candidate genes and pathways tied to key life history and agronomic traits under current and future climatic conditions. A total of 8, 22, and 47 QTL were identified for flowering time, early vigor, and energy traits, respectively. The results highlight the genomic structure of the Brachypodium species complex, and the diploid lines provided a resource that allows complex trait dissection within this grass model species.
CLIMATE change is impacting the production of food worldwide (Wheeler and von Braun 2013), and increasing global demand will soon outstrip the rate of improvement in crop yield by traditional breeding methods (Ray et al. 2013). To address food and climate security, there is a need for agricultural innovation across a range of scientific disciplines, from genomics to phenomics in new species across the landscape (Rivers et al. 2015). Breeding for more variable future climates, and for broad adaptability, requires an understanding of the plasticity of the genetic architecture of agronomic traits across environments. The use of dynamic climate chambers, that can mimic regional diurnal and seasonal climate types (Brown et al. 2014), allows us to examine the genetic architecture underlying complex adaptive traits across field-like environments.
Three complex traits that have a large impact on yield are ear emergence, early vigor, and energy use efficiency. The timing of ear emergence is crucially important to yield in many grain-growing regions, including Australia, where early flowering may lead to cold-induced sterility, while late flowering may result in heat stress or lack of water-limiting grain filling. Early vigor, defined as an increase in the above-ground biomass prior to stem elongation, is a beneficial trait in many environment types, especially when combined with increased transpiration efficiency (Condon et al. 2004). Since vapor pressure is low in winter, increased biomass during early growth improves plant water use efficiency. Early vigor also increases competition against weeds, reduces soil evaporation and may improve yields by increasing total seasonal biomass (Wilson et al. 2015a). Energy use efficiency is a relatively understudied component of plant growth that represents the efficient transfer of energy, acquired through photosynthesis, to the grain, and may significantly affect yield. Early studies indicate that energy efficiency, via lower respiration rates, is correlated with an increase in biomass in monocot species (Wilson and Jones 1982; Winzeler et al. 1988). Identification of the genetic architecture of energy use efficiency, timing of heading, and early vigor traits, as well as the genetic sensitivity to future temperature profiles, could accelerate breeding in crop species via selection for improved predicted yields in the future.
Genome-wide association studies (GWAS) combine dense genetic markers, identified via next-generation sequencing and high-throughput phenotyping, to identify the causative alleles and to predict complex quantitative traits (Atwell et al. 2010). The improvement of crop yield involves many complex traits, and the expression of these traits can be highly dependent on the growth environment. GWAS is an excellent method for mapping and predicting yield-related traits and their interaction with the environment. GWAS has been undertaken in a number of crop species; for dozens of agronomic traits in diploid species such as rice, barley, and corn (for review, see Huang and Han 2014), and has even be used reasonably successfully in wheat despite the added complexity of a hexaploid genome (e.g., Sukumaran et al. 2014).
Brachypodium distachyon is a model species for temperate C3 grass crops such as wheat, barley, rye, and oats as it is also located in the Pooideae family and has a number of advantageous characteristics as a model species (Draper et al. 2001; Garvin et al. 2008; Mur et al. 2011; Brutnell et al. 2015). B. distachyon also has a number of advantages over the related domestic Pooideae for a GWAS approach as it is a wild species with a wide climatic distribution, resulting in diverse phenotypes, as well as wide genomic diversity, for traits involved in life strategy and abiotic stress tolerance. B. distachyon has a small, fully sequenced genome of 270 Mb (The International Brachypodium Initiative 2009) compared to the 16 Gb of wheat (The International Wheat Genome Sequencing Consortium 2017) or 5.1 Gb of barley (The International Brachypodium Initiative 2009). It also contains a low percentage of repetitive noncoding DNA at 21.4% of nucleotides compared to >80% in wheat (Wicker et al. 2011) and 84% in barley (The International Barley Genome Sequencing Consortium 2012). This means that sequence reads from B. distachyon are much easier to identify and align compared to wheat, with a larger proportion of the sequencing providing useful reads. Finally, and perhaps most importantly, the short stature of B. distachyon allows large numbers of plants to be taken through full life cycles in controlled growth conditions.
Brachypodium is widespread throughout temperate regions, including its native Mediterranean range and introduced range in Australia, South Africa, and the western United States (Vogel et al. 2009; Wilson and Jones 2015). A large number of accessions have been collected throughout the world by the Brachypodium community, but the use of these collections in genomic association studies has been delayed by the cryptic nature of the Brachypodium species complex. The three species in this complex are difficult to distinguish in the field and include the diploid B. distachyon, the diploid B. stacei, and the allotetraploid B. hybridum, which contains one B. distachyon-like genome and one B. stacei-like genome (Hasterok et al. 2004; Catalán et al. 2012; Idziak et al. 2014). To add to the complexity, there is evidence of distinct subgroups of B. distachyon (Hasterok et al. 2004; Catalán et al. 2012; Idziak et al. 2014; Tyler et al. 2016). While the genome of the Bd21 reference genotype of B. distachyon was published in 2010, the genome of B. stacei and other SNP corrected genomes were released online in 2016 (DOE-JGI, http://phytozome.jgi.doe.gov/). Recently, a B. distachyon pan genome was published identifying geographic diversity and many new genes not identified in the initial reference (Gordon et al. 2017). Prior to our study, species identification has commonly been undertaken by morphoanatomical classification, a small number of markers, or cytology (e.g., Hasterok et al. 2004; The International Wheat Genome Sequencing Consortium 2017). There is a need for a rapid identification of species, subgroup, and genotype lineages within the Brachypodium species complex to aid the selection of HapMap sets, and to enable landscape genomic studies of migration and adaptation.
In this study, we aimed to (1) characterize the species, genotype, and population structure of a Brachypodium global diversity set to select a core haplotype mapping set for GWAS in B. distachyon and (2) identify the genetic architecture and plasticity of the agriculturally relevant traits of heading date, early vigor, and energy use efficiency in response to climate.
Materials and Methods
Genotyping by sequencing and species identification
Genotyping by sequencing (GBS) was undertaken as described by Elshire and colleagues (Elshire et al. 2011) using PstI enzyme and a library of homemade barcoded adaptors (see https://github.com/borevitzlab/brachy-genotyping; Morris et al. 2011; Nicotra et al. 2016). Approximately 384 samples were multiplexed to run on a single lane in an Illumina HiSeq 2000 with a median number of 564,000 100-bp read pairs per sample (https://github.com/borevitzlab/brachy-genotyping). Sequencing runs were undertaken by the Biomolecular Resource Facility [The John Curton School of Medical Research (JCSMR), Australian National University (ANU)].
Axe (Murray and Borevitz 2018) was used to demultiplex sequencing lanes into libraries, allowing no mismatches. AdapterRemoval (Schubert et al. 2016) was used to remove contaminants from reads, and merge overlapping read pairs. Reads were aligned using BWA MEM (Li 2013; Li and Durbin 2009) to the Bd21-3 (B. distachyon) and ABR114 (B. stacei) reference genomes (Phytozome v.12.1), and to a B. hybridum pseudoreference genome created by concatenating the B. stacei and B. distachyon reference genomes (Supplemental Material, File S1). Variants were called using the multiallelic model of samtools mpileup (Li 2011) and bcftools call (Danecek et al. 2016). Variants were filtered with bcftools filter, keeping only SNPs of reasonable mapping and variant qualities (≥10) and sequencing depth across samples (≥5 reads across all samples).
To determine the species of each of the accessions, we computed the proportion of each chromosome in the B. hybridum pseudoreference covered with at least three reads, excluding reads that mapped to multiple locations in the pseudoreference, using mosdepth (Pedersen and Quinlan 2017). The proportions of the B. distachyon/B. stacei genomes covered were normalized to be in [0, 1], and then used to assign samples into threshold groups: B. stacei (<0.03), intermediate B. stacei/B. hybridum (<0.28), B. hybridium (<0.34), intermediate B. hybridum/B. distachyon (0.94), and B. distachyon (>0.94); an additional group consisted of low coverage samples (<100,000 reads in total). Samples from intermediate and low coverage groups were excluded, and only variants in the respective genomes were used to allocate the three species groups.
Population structure of B. distachyon
To determine the population structure of B. distachyon, a pairwise identity-by-state (IBS) genetic distance was calculated to identify, among 490 high-quality samples, a core diversity set of 72 distinct genotypes using 82,800 SNPs derived from GBS data and the SNPRelate package using a z-score of 3.5. Occasionally, when genotypes are closely related, noise between technical replicates of an accession will result in them being split across the related genotypes. Therefore, we keep replicate(s) from the genotype with the majority of replicates for that accession, breaking ties by keeping the replicate with the lowest missing data. In addition, 29 accessions whose geographic origin was suspect were also excluded.
To avoid bias from including up to 30 inbred accessions of the same genotype, a reduced set was input into STRUCTURE V.2.3.4 (Evanno et al. 2005). A total of six replicates were run of population (K) 1–13 with a burn-in setting of 10,000 sets, and 100,000 permutations per run (Figure 1B and File S3). The optimal K was determined as K = 3 by Evanno’s Delta K, processed via Structure Harvester and CLUMPP (Evanno et al. 2005, Jakobsson and Rosenberg 2007; Earl and vonHoldt 2012). Barplots and pie charts were generated via inhouse developed R scripts available through github (https://github.com/borevitzlab/brachy-genotyping-notes).
For B. distachyon, the pairwise distance between genotypes was also calculated in R and plotted as a dendrogram (File S2). From this, a set of 107 accessions were selected to represent the genotypic diversity of the species for whole genome sequencing (WGS) to maximize SNP coverage across the genome.
Whole genome sequencing
For WGS, sequencing libraries for individual samples were prepared from 6 ng genomic DNA with the Nextera DNA Library Prep kit (Illumina, San Diego, CA). Libraries were enriched and barcoded with custom i5-, and i7-compatible oligos and Q5 High-Fidelity DNA Polymerase (NEB, Ipswich, MA). Libraries were pooled and sequenced in one lane on a NextSeq 500 sequencer (Illumina).
Trimit (Murray and Borevitz 2017) was used to clean WGS reads of adaptors, and merge overlapping read pairs. BWA MEM was then used to align these reads against the Bd21-1 reference genome (version 314_v3.1; The International Brachypodium Initiative 2009). Variants were called using freebayes (Garrison and Marth 2012) with default parameters. Variants were filtered such that only variants meeting the following criteria were kept: variant quality >20, minor allele frequency ≥2%. Heterozygous variant calls were changed to missing; due to the inbred nature of these accessions, heterozygous calls were almost certainly erroneous (https://github.com/borevitzlab/brachy-genotyping).
Linkage disequilibrium (LD) was calculated across the B. distachyon genome using consecutive windows of 2000 SNPs from the whole genome data of the HapMap 74 set (http://github.com/borevitzlab/brachy-genotyping-notes).
Plant growth
Individual grain of each genotype was planted 2.5 cm deep in square plastic pots (5 cm width, 8 cm deep) in a mix of 50:50 soil:washed river sand that had been steam pasteurized. Pots were then placed at 4° in the dark for 3 days to stratify the seed before being moved to specially modified climate chambers (see Garrison and Marth 2012). Accessions were organized in a randomized block design, in trays of 20 plants. The chambers have been fitted with seven LED light panels and are controlled to change the light intensity, light spectrum, air temperature and humidity every 5 min. Seasonal changes in climatic conditions and photoperiod were modeled using SolarCalc software (Spokas and Forcella 2006). The Wagga Wagga region is centered on ∼ −35S, 147E with an elevation of 147 m. Plants were fertilized with Thrive (N:P:K 25:5:8.8 + trace elements, Yates) and watered with tap water as needed. Growth stages were recorded based on the Huan developmental stage (Haun et al. 1973) up until stem elongation and thereafter the Zadoks scale was used. Total leaf area was measured with a Li-1300 Area Meter (Li-COR). For dry weight, leaf tissue was dried in a paper envelope at 60° for 5 days before weighing.
Conversions of phenotypic data
Energy use efficiency traits
Energy use efficiency traits were measured on plants from the 2015–2050 Temperature experiment at a four- to five-leaf stage. Photosynthetic parameters were measured using a Trayscan system (PSI) incorporating pulse amplitude modification (PAM) chlorophyll fluorescence measures of quantum efficiency (Rungrat et al. 2016). The parameters measured included photosynthetic efficiency, nonphotochemical quenching and photo-inhibition. See File S2 for protocol.
Dark respiration rate was measured using the Q2 system (Astec Global) as in Scafaro et al. (2017). In brief, this system uses an oxygen-sensitive fluorescent dye embedded in a cap to monitor the oxygen depletion with a tube containing the sample. A 3 cm fragment in the center of the last fully expanded leaf of each plant was used to measure dark respiration per unit area and per unit dry mass.
Several energy use efficiency formulas were calculated. These included a ratio of dark respiration to photosynthesis, and measures of growth per unit dark respiration. These were as follows:
Heritability
Broad-sense heritability was calculated from the phenotype data using the nlme package in R.
GWAS analysis
In preparation for GWAS, the genotype data were filtered to remove nonvariant SNPs and redundant SNPs (i.e., SNPs whose genotypes are not different from adjacent SNPs but have more missing data points). Then, SNPs with a minor allele frequency of <3% were filtered out. As there was 18.5% missing data in the original data set, imputation was undertaken. First, if the observed genotypes of two adjacent SNPs were not different, then the missing genotype of one SNP was replaced by the observed genotype of the other SNP. Second, the nearest neighbor (NN) method was implemented to impute the remaining missing genotypes based on Huang et al. (2010) with some modifications. The nearest 50 SNPs from each side of the SNP under imputation were selected to estimate similarity between each pair of accessions, and then the missing genotype of an accession was replaced by the observed majority genotype of the closest five accessions. These parameters were determined by simulations to achieve an optimal imputation success rate, which was 97.95% for our data. Finally, SNPs with a minor allele frequency <5% were filtered. For the phenotype data, the average value for the four replicates of each accession was calculated.
To determine a significance threshold, the permutation test was implemented on 1000 permutations of the phenotype data to estimate the genome-wide significance threshold at 0.05 for the trait of days to ear emergence. The significance threshold was determined to be a LOD (logarithm of odds) of 4.43583.
Data availability
GBS and whole genome sequence data are available in the sequence read archive at NCBI, BioprojectID PRJNA505390. Supplemental Figures and tables are available in FigShare. Supplemental material available at Figshare: https://doi.org/10.25386/genetics.7345160.
Results
Cryptic Brachypodium species, diverse genotypes, and population structure identified using GBS
To establish a diverse set of germplasm, thousands of Brachypodium accessions were collected on trips to south-west Europe, south-eastern Australia, the western USA, and through collaborations with the international Brachypodium community (https://github.com/borevitzlab/brachy-genotyping/blob/master/metadata/brachy-metadata.csv). Out of these, 1968 accessions were grown to produce single-seed descent lines in the greenhouses at the ANU for subsequent genomic analysis. A reduced representation approach, PstI digest, GBS was used to genetically profile the accessions.
Although once described as a single species, B. distachyon has more recently been shown to exist as a species complex consisting of a 5 chromosome B. distachyon, 10 chromosome B. stacei, and a 15 chromosome allopolyploid B. hybridum (Catalán et al. 2012). To categorize each accession into species within the Brachypodium complex, GBS tags were mapped to a merged reference genome consisting of B. distachyon (Bd21-3) and B. stacei (ABR114) (v1.1 DOE-JG, https://phytozome.jgi.doe.gov). Most accessions were readily distinguished as having reads that aligned to either or both reference genomes (see Materials and Methods; File S1). The majority of accessions, 56% (1100/1968), were identified as B. hybridum. In contrast, only 3% (60/1968) were classified as B. stacei, while 35% (698/1968) were B. distachyon. The remaining 6% (110/1968) could not be definitively assigned. Mapping of the accessions’ geographic locations showed that B. hybridum has expanded across the globe, representing essentially all the collections outside the native range (Figure 1A). Conversely, B. distachyon is largely limited to the native Mediterranean and Western Asian regions, with B. stacei in the same area, but less common.
Due to the highly selfing nature of all Brachypodium species, we next sought to categorize accessions into unique whole genome genotypes representing a single inbred lineage. Of the 698 accessions identified as B. distachyon, 490 could be reliably genotyped at 81,400 SNPs. We used the SNPRelate package (Zheng et al. 2012) to cluster these 490 accessions into 72 genotypes (see Materials and Methods; https://github.com/borevitzlab/brachy-genotyping-notes; File S2). Recombinant inbred lines, included as positive controls, were often called as unique genotypes as expected, but were excluded from subsequent analysis of natural population structure.
Whole genome variation
One or two accessions of each unique genotype was selected for further analysis. Whole genome sequencing was performed on this set of 107 B. distachyon accessions to determine high density variation at multiple levels, patterns of LD, and to enable GWAS. We identified 2,648,921 SNPs present in at least two accessions. Due to the high inbreeding and clonal family structure observed (File S4), we sought to select a representative accession from each inbred family, reducing 107 accessions to 63 highly diverse genotypes.
Previous genetic analysis on smaller data sets had shown B. distachyon to have substantial population structure, forming three groups representing ancestral structure in the Mediterranean region (Filiz et al. 2009; Vogel et al. 2009; Tyler et al. 2016; Gordon et al. 2017; Marques et al. 2017). To reduce data complexity, SNPs were subsampled to every 100th site to create a final SNP matrix of 26,490 variants that were fed into STRUCTURE v.2.3.4 (Pritchard et al. 2000; File S3). STRUCTURE analysis identified three main subgroups among B. distachyon genotypes and seven admixed lines (Figure 1B). The yellow lineage was the most diverged and represents subgroup B, with the brown and red structure groups representing the two populations of the A subgroup, split predominantly as an East and West population. Our STRUCTURE clustering is largely consistent with previous results on a smaller, partially overlapping sets of accessions (see Figure 4 of Tyler et al. 2016; Gordon et al. 2017). To visualize the geographic distribution, the ancestral group composition was summed across accessions for each geographic site (Figure 1C). The single B. distachyon accession from Australia, WLE2-2, was nearly identical to BdTR9f (GBS data, File S2) from southern western Turkey, from where it may have originated. It is shown in its ancestral location (Figure 1C, arrow).
Although there were only three accessions in the B subgroup, they diverged from the A subgroup with fixed differences at 6.5% of sites. By comparison, fixed divergence between the two clear subpopulations within the A subgroup was 1.5%. Finally, accessions within the same unique genotype diverged at between 0.1 and 0.4% of SNPs. A balanced set of representative accessions across the genotype lineages within just the A subgroup was selected for further genomic and phenomic analysis (File S4).
LD was calculated for consecutive windows of 2000 SNPs across the genome. There was large variation in LD, as the distance of decay to half maximal r2, across the genome (File S5) with the median LD 113 kb (50–235 kb interquartile range) and the maximum >2.4 Mb.
Determining the traits and climatic conditions for GWAS in B. distachyon
For our GWAS study, we wanted to identify high-throughput nondestructive phenotypic measures with high heritability. We also wanted to determine the best environmental conditions to characterize our traits of interest. Hence, two preliminary experiments were undertaken, one for flowering time and one for early vigor.
Flowering time was chosen as an ideal trait for GWAS as it has high heritability in many species including Arabidopsis (Brachi et al. 2010) and barley (Maurer et al. 2015). Previous studies of B. distachyon revealed that the dependence of flowering time on vernalization and photoperiod varies between accessions (Higgins et al. 2010; Ream et al. 2014; Bettgenhaeuser et al. 2017; Woods et al. 2017). This study aimed to identify QTL for earliness per se in flowering, i.e., those responsive to the accumulation of thermal time. Hence, a preliminary experiment was undertaken to determine if our conditions could meet the vernalization requirements of all B. distachyon accessions, and to determine which accessions had strong vernalization requirements in our conditions. To do this, 266 diverse A- and B-subgroup accessions, with five accessions replicated five to six times, were grown in both a simulated Winter sowing, starting June 1, and a Spring sowing, starting September 1, in Wagga Wagga, NSW, Australia (File S6). Ear emergence was monitored as a surrogate measure for flowering time, as flowering occurs largely within the ear in B. distachyon so is hard to accurately record (File S7). Out of the 266 accessions, there were 17 accessions that did not flower in the Spring condition, indicating a strong vernalization requirement (File S8A). All lines flowered in the Winter condition, indicating that night temperatures of 4° were sufficient to meet vernalization requirement. As expected, days to ear emergence showed a strong heritability in the Winter condition, as calculated from the replicated lines (H2 = 0.96). The thermal time to flowering was calculated to determine the dependence of flowering on the accumulation of thermal time. The fast cycling accessions, which did not require vernalization, still required a larger thermal time accumulation than the vernalization requiring accessions (File S8B). This indicates that these either have some low-level requirement for vernalization that is not being fully met in the Spring condition, or that the photoperiod is also a factor in this relationship. As this study aimed to identify QTL for earliness per se in flowering, i.e., those responsive to the accumulation of thermal time, we attempted to exclude vernalization and photoperiod effects by focusing on the Winter condition for the GWAS experiment.
In temperate grass crops such as wheat and barley, early vigor can result in an increased yield in short seasons, or in seasons where there is high rainfall (reviewed in Wilson et al. 2015c). Often, the dimensions of seedling leaves are measured as a nondestructive surrogate measure for early vigor (Rebetzke and Richards 1999; Wilson et al. 2015b). To confirm that this was also an appropriate surrogate measure for early vigor in B. distachyon, a highly replicated (n = 10) validation experiment was performed on six diverse B. distachyon lines (File S9A) in a simulated Wagga Wagga, seasonal climate starting on September 1 (Spring). After 7 weeks, when plants had between four and five mainstem leaves, the dimensions of leaf #3, seedling height, total leaf area, and above-ground dry weight were measured and phenotypic correlations were calculated (File S9B). Broad sense heritability was also calculated to determine which early vigor trait would provide the most power for mapping QTL with GWAS (File S9C). Leaf #3 width and length correlated well with above-ground biomass (r2 = 0.46, P < 0.01, and r2 = 0.48, P < 0.01, respectively) and had quite high heritabilities of H2 = 0.60 and H2 = 0.64, respectively, as compared to above ground dry mass, H2 = 0.51. Interestingly, seedling height also had a strong correlation with above ground biomass (r2 = 0.74, P < 0.01) with a heritability of H2 = 0.74. However, this trait was also more highly correlated with developmental stage, as indicated by the number of leaves (r2 = 0.21, P < 0.01), than the dimensions of leaf #3. To get the most direct measure of early vigor, without the influence of developmental stage, the dimensions of leaf #3 were chosen as the focus for the GWAS.
Selection of global HapMap set
High-level population structure confounds GWAS when there are few segregating SNPs in common between ancestral groups relative to variation within each subgroups (Brachi et al. 2011). Here, we focused on subgroup A, which contains a majority of unique genotypes, resulting in a HapMap set of 74 genotypes. Within the A subgroup there is still clear population structure, but further subset selection would limit both the sample size and the phenotypic and genotypic diversity, reducing the rate of true positive results. This residual relatedness between lines was accounted for by including a kinship matrix in the GWAS model.
Early vigor and ear emergence show genotypic variation in response to different simulated environments
To determine the genetic architecture for ear emergence date, early vigor, and a range of other agronomic traits (see Materials and Methods), the refined and balanced HapMap set of 74 B. distachyon accessions (File S10), with four biological replicates, were grown in two simulated conditions in climate chambers (Brown et al. 2014). To determine the effect of an increase in temperature in line with climate change predictions on the traits of interest, the conditions modeled a present (2015, Figure 2A) and a future (2050, Figure 2B) temperature profile at Wagga Wagga, NSW, Australia. The appropriate increase in average maximum and minimum temperature for each month were determined using an average of 12 global climate change models determined to be high confidence for south east Australia using the Climate Futures Tool (Figure 2C; Wilson et al. 2015a; File S11).
As expected, the accessions developed quicker and grew larger in the 2050 temperature profile (Figure 2, A and B) as is consistent with a quicker accumulation of thermal time (Figure 2D). Early vigor parameters and energy use efficiency traits were measured when the majority of plants were at a four-leaf stage. Growth stages, tiller numbers and ear emergence dates were monitored twice a week (File S12–S14). The experiment ceased after 200 days of growth, at which time there were five and seven lines that did not flower in the 2015 condition and 2050 conditions, respectively. The remaining lines reached ear emergence at a similar number of days in both the present and future conditions (Figure 2E). However, when converted to thermal time, those lines in the 2015 temperature condition required less thermal time than those in the 2050 temperature condition (Figure 2, D and F). This indicates that there is generally more dependence on photoperiod in this population than on thermal time to trigger the transition to flowering. There was variation between genotypes in the plasticity of their response to the two conditions (Figure 2, E and F), indicating that it would be worthwhile mapping the genotype by environment interaction (G × E).
Determining the genetic architecture of early growth, ear emergence, and energy use efficiency traits in response to environment
GWAS were performed on raw and derived traits as described in the Materials and Methods (Figure 3 and File S15 and File S16). All GWAS data are publicly available and traits are genome browseable online at https://easygwas.ethz.ch/gwas/myhistory/public/17/. For ear emergence, eight significant QTL were identified. EarEmerg_QTL4.2 explains 62% of the phenotypic variation in thermal time to ear emergence in the 2015 temperature condition, while two QTL, EarEmerg_QTL3.1 and EarEmerg_QTL5.3, explain 56 and 10%, respectively, of the phenotypic variance in thermal time to ear emergence in the 2050 temperature condition. No QTL were found to be significant in both conditions but EarEmerg_QTL5.3 was significant in the 2050 temperature condition and was just under the significant threshold in the 2015 temperature condition (Figure 4A and File S17). Within the 100 kb region of this SNP there are 15 genes, several of which could be relevant to the regulation of flowering, including a YABBY transcription factor (Bradi5g16910), a no apical meristem (NAM) protein (Bradi5g16917), and an expressed gene containing a RNA recognition motif (Bradi5g16930). Interestingly, there were two QTL that were significant for thermal time to ear emergence, EarEmerg_QTL3.1 and EarEmerg_QTL4.2, but not for days to ear emergence. There were six QTL identified for the G × E interaction, explaining, in part, the variation among lines in response to future climate.
For early vigor, 22 significant QTL were identified for five traits across the two climate conditions (File S15). Two QTL were identified in both conditions, EarlyVigour_QTL1.1 and EarlyVigour_QTL3.1, and both of these were for leaf #3 length. The 100-kb region surrounding these QTL contained 19 and 13 genes, respectively (Figure 4, B and C). There was a highly significant QTL on chromosome three for growth rate 1, EarlyVigour_QTL3.3, a measure of the rate of development of the seedling at the two leaf stage, but only in the 2015 temperature condition. The 100-kb region surrounding this QTL contained 13 genes (File S18). A total of six QTL were identified for the G × E interaction across the two conditions for early vigor traits.
For the energy use efficiency traits, a total of 47 QTL were identified across the two conditions for the three measured traits and four derived traits (File S15). Of these QTL, none were found in both environments. However, a strong QTL, Energy_QTL3.3, was identified for average quantum yield, a measure of photosynthetic efficiency, in the 2015 temperature environment. The 100-kb region around this QTL contained 24 genes including a low PSII accumulation three chloroplastic protein (Bradi3g01550), a Heat Shock Protein (Bradi3g01477) and several transcription factors (Figure 4D and File S19).
Discussion
Thanks to the international Brachypodium community, in addition to our own collections, here we were able to provide the most comprehensive survey of Brachypodium species complex diversity to date. With 1968 accessions across the globe this is a >10-fold increase from previous studies (Filiz et al. 2009; Tyler et al. 2016).
Since being described as three separate species in 2012 (Catalán et al. 2012), species identification in the Brachypodium species complex has been achieved by morphology, PCR of a select set of markers or DNA barcoding (e.g., Rebetzke et al. 1999a; Wilson et al. 2015b). Here, we present a unique systematic method of determining the species of an accession using low coverage GBS and bioinformatics, providing a high-throughput and low-cost alternative for species identification. We found that the majority of our accessions were B. hybridum (56%), including the vast majority of accessions in Australia and North America (Figure 1A). The wide dispersion of this species may be due to the benefit of the multiple genomes resulting from polyploidization (te Beest et al. 2012). There were relatively few B. stacei (3%), which were limited to the Mediterranean region (Figure 1A).
Within B. distachyon itself, we found significant population structure, including high level subgroup splits, with 6.5% of SNPs diverged between subgroups, which is greater than that found between indica and japonica rice at 1.4% divergence (Ma and Bennetzen 2004). While many previous studies have focused on individual regions (Filiz et al. 2009; Marques et al. 2017), the collection of 490 diverse B. distachyon accessions genotyped at 81,400 high quality SNPs presented here has allowed us to further distinguish groups with the B. distachyon subgroups, with an eastern and western European group in each subgroup. A number of geographically diverse highly related genotypic lineages were also identified, which showed within-lineage divergence of between 0.1 and 0.4% of SNPs. The geographic spread of these lineages highlights the inbreeding nature and high dispersal ability of B. distachyon.
The hierarchical levels of genetic variation within the Brachypodium species complex can be attributed to allopolyploidization and subspeciation, possibly during the most recent ice age; east/west IBD in Europe; and the high levels of self-fertilization in the species (Wilson et al. 2015a). These levels of population structure have been seen in Arabidopsis (Atwell et al. 2010), and other highly selfing plant species such as barley (Wang et al. 2012), but are more extreme in Brachypodium. In rice, either the indica sub-species (Huang et al. 2012) or japonica subspecies (Yano et al. 2016), have been separately used for GWAS. Similarly, to deal with the population structure in this study, the HapMap set was limited to the A subgroup of B. distachyon with remaining relatedness included in the GWAS analysis using mixed models (Cheng et al. 2011).
The lack of recombinant genetic diversity with subgroup and populations of B. distachyon also limits the power of GWAS analysis. The HapMap set contains a large amount of genomic diversity (>1% of bases are variable) but the sample size is low and the extent of LD is high, limiting mapping resolution. However, the patterns are similar to rice where GWAS is very effective as sample size increases (Huang and Han 2014). The construction of a Nested Association Mapping (NAM) population for B. distachyon would be advantageous to break-up the population and familial lineages, and to increase the frequency of minor alleles. This has been a successful approach in other species such as maize and wheat (Tian et al. 2011; Bajgain et al. 2016). Nevertheless, our set of lines and genomic data available in easyGWAS are an important resource for the community to map the genetic basis of various complex traits in this emerging model grass species. The small stature and rapid generation time of Brachypodium makes it especially useful for high throughput assays of phenomic traits across a range of controlled conditions.
In field conditions, determining the relationship between various physiological traits and their impact on yield is difficult due to seasonal environmental variability and the presence of a range of abiotic and biotic stresses. However, experiments in growth chambers often have little relevance to field conditions due to the unrealistic and static nature of the conditions. By using dynamic growth conditions, which mimic regional climates, we can avoid the stochastic downsides of field experiments while providing results arguably more translatable to the field (Brown et al. 2014; Poorter et al. 2016). The use of climate chambers also allows the impact of small changes in climate to be observed, and the dissection of which components of the climate have the largest influence on a trait of interest. In this study, we examined the effect of an increase in temperature in line with climate change model predictions for 2050 in south eastern Australia. Unexpectedly, there was generally a short delay of flowering time in the 2050 temperature condition, with variation in the extent of delay in different genotypes, while there was little dependence of flowering on the accumulation of thermal time. This suggests that there may be some vernalization requirements in B. distachyon that are not being met in the 2050 temperature condition. The lack of vernalization is also evident in the fact that seven lines had not flowered by the end of the 2050 temperature condition, while five lines did not flower in the 2015 temperature condition. While this GWAS analysis did not identify known flowering time loci that regulate vernalization-induced flowering such as VRN1, VRN2, and FT (Woods et al. 2014; Bettgenhaeuser et al. 2017), the QTL may represent more subtle vernalization processes that would be important for facultative varieties. Perhaps largely to the difference in growth conditions, the QTL in this study did not overlap with those found in a previous GWAS of flowering time (Tyler et al. 2016); this may also be an example of the Beavis effect (Xu 2003). Candidate genes identified for flowering time here included several transcription factors, including a YABBY transcription factor under EarEmerg_QTL5.3. The closest rice ortholog, Os04g45330, to this YABBY transcription factor is most highly expressed in the shoot apical meristem and developing inflorescence (Rice Gene Expression Atlas), while the closest Arabidopsis ortholog, At2g45190, is involved in regulation of the floral morphology (Lu et al. 2007). This EarEmerg_QTL5.3 was significant in the 2050 temperature conditions and was only just below the significance threshold in the 2015 temperature condition (Figure 4A).
Early vigor is an important trait in many parts of Australia and the rest of the world, where there is competition from weeds and a shorter season. Despite the highest correlating nondestructive measure of early above ground biomass being seedling height, the most robust QTL across environments were actually identified by leaf #3 length. Two QTL identified for leaf #3 length were identified in both environments, indicating they could potentially be useful for breeding for early vigor in multiple environment types. One of these, EarlyVigour_QTL1.1 is located in an area of synteny to other areas where early vigor QTL have been identified at the end of chromosome 3 in rice (Lu et al. 2007; The International Brachypodium Initiative 2009; Singh et al. 2017) and Chromosome 4 in wheat (Rebetzke et al. 2001). Within EarlyVigour_QTL1.1 there is a candidate gene, Bradi1g00666, that is described as an ethylene-responsive transcription factor. The main candidate gene in the QTL on chromosome 3 in rice was also an ethylene responsive gene (Singh et al. 2017). The EarlyVigour_QTL3.1 for leaf #3 length was also found to be significant across both environments. There were no obvious candidate genes for this QTL, but a number of signaling proteins that could be involved in molecular control of leaf size (Figure 4C and File S18).
The balance of energy production and use in plants is highly linked to the conditions that the plant is grown under; however, genetic variation controlling the energy efficiency of plants could be used to increase yield potentials. The quantum yield is an indicator of photosynthetic efficiency, the proportion of energy harvested through the light-harvesting complexes that goes toward producing photosynthates (Rungrat et al. 2016). No QTL were identified in common across both environments, but there were 11 QTL that were identified for the G × E interaction. This may be due to the sensitivity of these energy processes to the subtle difference in environments or a result of being measured on different days to allow comparison of plants at the same developmental stage. A strong QTL was identified for quantum yield, a measure of the efficiency of Photosystem II (PSII), in the 2015 climate but, interestingly, not in the 2050 climate. Candidate genes under this QTL included a gene with 66% homology to the Low PSII Accumulation 3 (LPA3) gene in Arabidopsis, which has been shown to be important in PSII assembly (Lu 2016). Further studies into the importance of this QTL in different conditions, as well as the other photosynthesis and respiration QTL, would be worthwhile.
In conclusion, the Brachypodium species complex is heavily structured at the ploidy, subgroups, population, and family levels. This limits the ability to identify the genetic basis of adaptation as relatively few recombinant genotypes were obtained. Despite these limitations, this study indicates the potential to use Brachypodium distachyon, a model for Pooideae grass crops, to identify genetic variation in key pathways underlying agricultural traits through GWAS. Further wild collections and/or the development of NAM populations could address the limitation of recombinant genotypes and result in very high power mapping population typical of 1000 genome projects. As it now stands, Brachypodium is a good model for both polyploidization, with likely multiple events among small divergent genomes, and for invasion biology with multiple widespread genotypes identified across continents, regions, and sites.
Acknowledgments
Brachypodium accession contributors (PI: principle investigator): ShuangShuang Liu, Kent Bradford (PI), Smadar Ezrati (PI), Hikmet Budak (PI), Diana Lopez, Pilar Catalan (PI), David Garvin (PI), John Vogel (PI), Sean Gordon, Sam Hazen (PI), Luis Mur (PI). We would like to acknowledge the technical assistance of Suyan Yee and Allison Heussler. We thank Scott Ferguson and Dominik Grimm for their help adding SNPs and traits into easyGWAS. We are grateful for funding and support from the Australian Research Council Centre of Excellence in Plant Energy Biology (CE140100008). Australian Plant Phenomics Facility is supported under the National Collaborative Research Infrastructure Strategy of the Australian Government. The research was undertaken with the assistance of resources from the National Computational Infrastructure (NCI), which is supported by the Australian Government.
Author contributions: P.B.W., J.C.S., N.C.A., N.W., and S.P.G. undertook the experiments; P.B.W., J.C.S., J.P.V., and J.O.B. designed the study concept and experiments; P.B.W., J.C.S., K.D.M., S.R.E., R.C., K.S., and S.P.G. undertook the analysis of the data; P.B.W., J.C.S., K.D.M., S.R.E., and J.O.B. wrote the manuscript, and all authors read the manuscript.
Footnotes
Supplemental material available at Figshare: https://doi.org/10.25386/genetics.7345160.
Communicating editor: M. Johnston
Literature Cited
Climate Change in Australia website, 2015 Available at: https://www.climatechangeinaustralia.gov.au/en/climate-projections/climate-futures-tool/introduction-climate-futures/. Accessed: September 1, 2015
Pedersen, B. S., and A. R. Quinlan, 2017 Mosdepth: quick coverage calculation for genomes and exomes. Bioinformatics. Available at: http://academic.oup.com/bioinformatics/advance-article/doi/10.1093/bioinformatics/btx699/4583630.
Tyler, L., S. J. Lee, N. D. Young, G. A. DeIulio, E. Benavente et al., 2016 Population structure in the model grass is highly correlated with flowering differences across broad geographic areas. Plant Genome 9: doi: 10.3835/plantgenome2015.08.0074.
Author notes
Present address: Grains Research and Development Corporation, Canberra, ACT, Australia.
These authors contributed equally to this work.
Present address: Oak Ridge National Lab, Oak Ridge, TN 37830.
List of Accession Contributors in the Acknowledgments.